To work in the best possible working conditions, SESA SYSTEMS offers electric workstations for a more ergonomic working posture on the shop floor. Good shop floor ergonomics is crucial to safeguard employee health but also to maintain company performance.
Electric workstations to adapt to the operator’s working environment
The operator is at the heart of the organisation, with several duties which they must perform such as production, level 1 maintenance and quality control. These different tasks require specific positions depending on the workstation used, and the environment is often poorly adapted to individuals. Bad posture limits operator working capacity, endangers health and results in reduced performance. An adjustable electric workstation is an excellent way to avoid this.
Our range contains two different electric workstations: the QUALIPOST 620 ERGO and the QUALIPOST 3200 ERGO, both offering multiple possible combinations to arrange your workstation to your taste. Equipped with telescopic columns controlled by electric actuators, the ergonomic working tables can be quickly adjusted to the desired height. Using a control button, you can precisely adjust your working surface, adapting it to your height and the tasks performed. As an example: precision work such as the careful assembly of a product requires the workstation to be adjusted to a height around 5 cm under the employee’s elbow. However demanding work requires a much lower working surface. The electric industrial workstations ensure greater employee comfort and allow them to change between a sitting, standing/sitting and standing position.
Additional products for a 100% ergonomic working environment
You can personalise your sit-stand workstations depending on your respective tasks (maintenance, assembly, packaging, etc.) with an enamel backing, perforated backing or simply with an aluminium frame with a multi-purpose bar.
To complement the electric workstations and to guarantee employee well-being, we recommend using additional ergonomic products such as the LEANPOST 300 electric trolley or the LEANPOST 400 fixed trolley. To complement your electric workstations, we recommend using ergonomic shop floor seats or standing seats if you need to sit whilst working most of the time. If not, we recommend using anti-fatigue mats, offering safety and comfort.
An ergonomic working environment with electric equipment encourages employee well-being at work and reduces MSD.
We encourage you to read ourwhite paper on ergonomics to find out more about ergonomics best practices and the different innovative solutions that we offer!
The quality control position is essential within a production workshop in industry. Quality management and control are essential to any company in order to guarantee products without any defects, quality respecting procedures, standards and avoiding disputes.
It is therefore important to assign a special and ergonomic layout. Indeed, optimal concentration is necessary for this task as well as well-being at the workplace. To guarantee the Quality of Life at work, SESA SYSTEMS has developed ergonomic and electrical quality control stations.
Adjustable for any operator and collaborator, the position becomes totally adaptable for everyone.
In addition, different heights can be adjusted to guarantee ergonomics depending on the work performed (precision work, gripping heavy loads).
In a dynamic of continuous improvement, ergonomics and Quality of Life at work occupy a large place in the well-being of employees.
These quality control stations are fully customizable with a multitude of accessories to add. Composing your quality control position has never been easier. These positions have been developed to guarantee a reduction in Musculoskeletal Disorders and promote the grip area of each employee.
All electrical equipment can be plugged in very easily or powered by a battery.
The range of QUALIPOST workstations makes it easy to adapt to the working environment of quality control operators. The arrangement of the tools on the perforated panels allows a clear and precise identification, each object in its place, storage and cleaning are thus easy and allow to apply the 5S method.
The organization of the operator's workstation must be defined so that it is ergonomic. This does not only concern the workbench, but the entire work environment. It is therefore necessary, to work ergonomically, and reduce occupational diseases, to acquire different products adjustable in height and which therefore increase comfort and Quality of Life at Work.
The quality control position is essential within a production workshop in industry. Quality management and control are essential to any company in order to guarantee products without any defects, quality respecting procedures, standards and avoiding disputes.
It is therefore important to assign a special and ergonomic layout. Indeed, optimal concentration is necessary for this task as well as well-being at the workplace. To guarantee the Quality of Life at work, SESA SYSTEMS has developed ergonomic and electrical quality control stations.
Adjustable for any operator and collaborator, the position becomes totally adaptable for everyone.
In addition, different heights can be adjusted to guarantee ergonomics depending on the work performed (precision work, gripping heavy loads).
In a dynamic of continuous improvement, ergonomics and Quality of Life at work occupy a large place in the well-being of employees.
These quality control stations are fully customizable with a multitude of accessories to add. Composing your quality control position has never been easier. These positions have been developed to guarantee a reduction in Musculoskeletal Disorders and promote the grip area of each employee.
All electrical equipment can be plugged in very easily or powered by a battery.
The range of QUALIPOST workstations makes it easy to adapt to the working environment of quality control operators. The arrangement of the tools on the perforated panels allows a clear and precise identification, each object in its place, storage and cleaning are thus easy and allow to apply the 5S method.
The organization of the operator's workstation must be defined so that it is ergonomic. This does not only concern the workbench, but the entire work environment. It is therefore necessary, to work ergonomically, and reduce occupational diseases, to acquire different products adjustable in height and which therefore increase comfort and Quality of Life at Work.
Quality of products and services
to fully satisfy you
50 LEAN experts
International network of experts
LEAN tools and approaches
To work in the best possible working conditions, SESA SYSTEMS offers electric workstations for a more ergonomic working posture on the shop floor. Good shop floor ergonomics is crucial to safeguard employee health but also to maintain company performance.
Electric workstations to adapt to the operator’s working environment
The operator is at the heart of the organisation, with several duties which they must perform such as production, level 1 maintenance and quality control. These different tasks require specific positions depending on the workstation used, and the environment is often poorly adapted to individuals. Bad posture limits operator working capacity, endangers health and results in reduced performance. An adjustable electric workstation is an excellent way to avoid this.
Our range contains two different electric workstations: the QUALIPOST 620 ERGO and the QUALIPOST 3200 ERGO, both offering multiple possible combinations to arrange your workstation to your taste. Equipped with telescopic columns controlled by electric actuators, the ergonomic working tables can be quickly adjusted to the desired height. Using a control button, you can precisely adjust your working surface, adapting it to your height and the tasks performed. As an example: precision work such as the careful assembly of a product requires the workstation to be adjusted to a height around 5 cm under the employee’s elbow. However demanding work requires a much lower working surface. The electric industrial workstations ensure greater employee comfort and allow them to change between a sitting, standing/sitting and standing position.
Additional products for a 100% ergonomic working environment
You can personalise your sit-stand workstations depending on your respective tasks (maintenance, assembly, packaging, etc.) with an enamel backing, perforated backing or simply with an aluminium frame with a multi-purpose bar.
To complement the electric workstations and to guarantee employee well-being, we recommend using additional ergonomic products such as the LEANPOST 300 electric trolley or the LEANPOST 400 fixed trolley. To complement your electric workstations, we recommend using ergonomic shop floor seats or standing seats if you need to sit whilst working most of the time. If not, we recommend using anti-fatigue mats, offering safety and comfort.
An ergonomic working environment with electric equipment encourages employee well-being at work and reduces MSD.
We encourage you to read ourwhite paper on ergonomics to find out more about ergonomics best practices and the different innovative solutions that we offer!
